Recycled Liquids and Liquids with Suspended Solids from 0.1 to 800 microns
Hydra-Cell® reliably pumps liquids with no fine filtration required.
Suspended solids in a liquid can present many challenges in pumping, especially sub 10 micron particles which can effect dynamic seals in rotating parts and increase packing wear. Such particles can be present due to recycling of liquids and can be present in liquids such as acids, caustics, isocyanates, phosphates due to crystallisation when exposed to water, air or cold temperatures. These conditions often mean pumps with dynamic seals, such as centrifugal pumps used in chemical transfer, need seal flushing.
Suspended solids can also present challenges for metering and dosing pumps with vertical, orientated ball valves building up on the valve seat causing maintenance.
The Hydra-Cell pumps combination of seal-free, packing-free design and spring actuated horizontal disc check valves handles liquids with suspended particles reliably, even heavily laden slurries.
Hydra-Cell® Seal-less Pumps Reliably Handle Recycled Liquids and Liquids with Suspended Solids
- Acid Solution
- Acidic Gel
- Acids
- Adhesive Emulsion
- Algae Solution
- Alumina Slurry
- Amine
- Animal Fats
- Aqueous Ammonia
- Aqueous Emulsion
- Bentonite
- Benzol
- Bio Oil
- Brackish Water
- Brine Solution
- Butylacetate
- Calcium Carbonate
- Carbon Hydrogen Concentrate
- Catalyst
- Catalytic Slurry
- Caustic Soda
- Celite
- Ceramic Slurry
- Chalk
- Cleaning Solution
- Coal Tar Oil
- Cocoa Mass
- Coolant (5% emulsion)
- Co-produced Water
- Crude Oil
- Crude Oil and Emulsion
- Cutting Oil
- Decoking Mix
- De-Ionised Water
- Demineralised Water
- Detergent
- Dextrose
- Diesel Oil
- Dye
- Enprep 576E
- Ethyl Lactate
- Ethylene Glycol
- Euro III; Euro IV Blended Diesel
- Fermented Wine
- Food Colours
- Formalin
- Formation Water
- Fumaric Acid
- Furnace Oil
- Gas Condensate
- Gasoline (Straight Run)
- Ground Lead Slurry
- Grouting Cement Mix
- HFA Fire Resistant Hydraulic Fluid
- High Speed Diesel (HSD)
- Hot Water
- Hydrocarbon Condensate
- Hydrochloric Acid
- Hygienic Liquids
- Ink
- Isocyanates
- Kerosene Jet A1
- Latex
- Leachate
- Lecithin
- Lime Slurry
- Liquid Wastewater
- Machine Tool Coolant
- Magnesium Peroxide Solution
- Malt
- Mannitol
- Methanol
- Methanol and Glycol (MEG)
- Methyl Formate
- Microcement
- Monomers
- Motor Spirit Fuels
- Mud Slurry
- Naphtha
- Nitric Acid (HNO3)
- Oil
- Oil Emulsion
- Organic Solvents
- Paint
- Paper Processing
- Paraffin
- Pharmaceuticals
- Phosphate
- Photographic Wash Water
- Polyacrylamide
- Polyol (Filled 70%)
- Polyvinyl Alcohol (PVA)
- Potash
- Printing Ink
- Produced Water and Waste Oil
- Proprietary Liquids
- Proprietary Solution of Inorganic Chemistry
- Rape Seed Oil
- Recycled Detergent
- Recycled Solvents
- Recycled Water
- Recycled Water with Particulate Contamination
- Resin
- Respiratory Chemicals
- Roof Tar Emulsion
- Salt Water
- Salt Water & Sand
- Sapphire Dust
- Seawater
- Silica Carbide Grit (in water)
- Sodium Chloride
- Sodium Hydroxide
- Sodium Silicate
- Solvent Slurry
- Solvent Waste
- Sour Water
- Soured Water
- Soya Oil
- Starch Glue
- Steam Condensate
- Sugar Solution
- Sulfhuric Acid
- Sulphuric Acid
- Synthetic Emulsion
- Synthetic Grinding Coolant
- Terpene
- Titanium Dioxide
- Titanium Oxide
- Treated Effluent Water
- Tri-Ethylene Glycol (TEG)
- Turpentine
- Urea
- Urethane
- Viscous Resins
- Waste Oil
- Water
- Water (ETP)
- Water (with High TDS)
- Water with 10% Nitric Acid
- Xylene
Careers
Request a technical support meeting online
CALL +44 (0) 1252 816847