PERFORMANCE SUMMARY
G25-M4L | |
Max. Inlet Pressure: | Up to 17 Bar |
Max. Discharge Pressure: | Up to 20 Bar |
Flow Range: | 216 - 2600 L/hr |
Motor Required: | 3kW / IEC 100 |
4-Pole / B5 | |
| |
G25-M4M | |
Max. Inlet Pressure: | Up to 17 Bar |
Max. Discharge Pressure: | Up to 60 Bar |
Flow Range: | 216 - 2600 L/hr |
Motor Required: | 7.5kW / IEC 132 |
4-Pole / B5 |
AVAILABLE OPTIONS
- API 674 Pump Construction
- API 675 Performance Standard
- ATEX
- Oil Cooler for Hot Duties
Hydraulic End:
- Cast Aluminium (Standard)
- Ductile Iron
G25 Dosing
LIQUID HEAD MATERIALS
Brass
Cast Iron (Nickel-Plated)
Polypropylene with Hastelloy C followers
Polypropylene with 316L Stainless Steel followers
PVDF with Hastelloy C followers
Duplex Alloy 2205
Super Duplex Alloy 2207
316L Stainless Steel
316L Stainless Steel - ANSI RF Flanges 150x600lb
316L Stainless Steel - Tri-Clamp Ferrules
Hastelloy CW12MW
DIAPHRAGM MATERIALS
Aflas
Buna-N-XS
EPDM
FKM
FFKM / PTFE O-Ring
Neoprene
PTFE
VALVE MATERIALS
Ceramic
Hastelloy C
Nitronic 50
Tungsten Carbide
17-4 PH Stainless Steel
CONNECTION PORTS
Threaded | |
Inlet | 1-1/2" BSPT |
Discharge | 1" BSPT |
ANSI (RF) | |
Inlet | 150lb RF |
Discharge | 600lb RF |
Tri-Clamps - Max. 80 bar | |
Inlet | 2" |
Discharge | 1" |
NOTE:
Tri-clamp Flanges polished to 0.8 or 0.4 Ra
(Includes polishing of Pump Head, Valve Plate, Valves, Valve Seats, Springs & Retainers,
along with TSE, Passivation, Surface Finish & Weld Procedure Certificates)
Downloads
DATASHEET
|
G25 Dosing Range Specifications |
MANUALS
|
G25 Installation & Service Manual |
G25 Spare Parts Metallic Pump Head |
G25 Spare Parts Non-Metallic Pump Head |
Oil Cooler Manual |
ACCESSORIES
|
Hydra Oil |
Oil Reservoir |
|
G25 - M4L General Assembly |
|
G25 - M4M General Assembly |
|
Careers
Request a technical support meeting online
CALL +44 (0) 1252 816847